REVOPOINT INSPIRE 3D SCANNER

Thank you for looking.

This is the REVOPOINT 3D SCANNER INSPIRE.

I'm selling it because I don't have many opportunities to use it.
It has only been used a few times for basic operation checks, so it is in good condition.
It can scan at a maximum accuracy of 0.2mm and at a distance of 250mm to 500mm, making it suitable for scanning small to medium-sized objects.
Since the marker pad was difficult to use, I created and attached a 3D printed part to fix it to the mini turntable (please check the photos).
I will send it as is because it is easier to use, but you can remove it if you don't need it.
[Addendum]
I found a small scratch on the top of the front panel.
It does not affect the functionality at all, but please refrain from purchasing if you are concerned about it.

[Set Contents]
■ INSPIRE Main Unit
■ Tripod
■ USB-Type-C Cable
■ Type-C Conversion Adapter
■ Calibration Board
■ Mini Turntable / USB Cable
■ Marker Pad
■ Markers, Adhesive Tack, Magic Mat
■ Sample Engraving
■ Instruction Manual
■ Box: Yes

[Specifications]
■ Single Frame Accuracy: Up to 0.2 mm
■ Point Distance: 0.1 mm
■ Operating Distance: 250 mm ~ 500 mm
■ Weight: 140g
■ Dimensions: Width 132 x Height 45 x Depth 27 mm

[Condition]
■ Operation confirmed
■ Exterior: No noticeable scratches